Motor and transmission: • Powerful brushless 24 V DC motor (BLDC) with multistage planetary gear
• Drive-supporting balancing springs
• Designed for intensive use up to 100% duty cycle (= continuous operation)
• Can be quickly and simply changed from right-hand drive to left-hand drive
Barrier control:• Intelligent motor controller MO24 including:
• Configuration via joystick and four-digit LED display
• Electronic rotation speed control and end position detection for perfect running
• 3 adjustable speeds for different barrier arms
• 3 loop detectors
Safety features: • Barrier arm with rubber lower edge
• Barrier arm sensor in barrier beam shaft
• Auto-reverse function upon detection of an obstruction
• Mechanical emergency release via release lever
• Automatic opening by additional module (optional) in case of power failure
Protection against vandalism: • Fastening of the barrier arm with plastic screws as predetermined breaking point
• Stainless-steel screws, which are also included in the delivery, allow for higher wind loads
• Adjustable clamp connection in the barrier mechanics helps to prevent damage in case of pushing or pulling the barrier arm downward or upward
Available barrier arm types and length: • Straight or articulated barrier arm in length of 2.5 m, 3.0 m or 3.5 m
• Illuminated barrier arm in straight variant as option
• Non-illuminated barrier arms can be cut to the desired length on-site
• Powder-coated aluminium in white/red colour
• Right hand and left hand applicable
Opening and closing times: • Depending on type and length of barrier arm: 1.3 s, 1.8 s or 2.5 s
Connections: • Power supply / Control and acknowledge signals / 3 inductive loops
Power supply: • 88V - 264V, 47Hz - 63Hz
Power consumption: • Standby: approx. 5 Watt
• Operation: approx. 70 - 85 Watt (depending on barrier arm length)
Housing: • Powder-coated housing made of aluminium with clamping technology, patent pending
• For indoor and outdoor use / Ingress Protection Rating according to IEC 60529: IP54
Standard colours: • Hood: RAL 7043 (traffic grey B) / Housing base: RAL 1003 (signal yellow) or RAL 9016 (traffic white) • Housing base in special colour according to S&B colour range available as an option
Place of installation: • Temperature range: -20 °C ... +50 ° / Relative humidity: ±0 % ... 95 % (non-condensing)
Weight: • approx. 58 kg without barrier arm Approvals and conformity:
• Europe: CE Mark / USA/Canada: NRTL approval is in preparation
• Approval name according to name plate affixed to the device: AS40e
Extras: • Adapter plate for using the existing anchor bolts of AS30/AS32 (predecessor models)
• LAN via RJ45 plug
• Hand-held transmitter / radio receiver for remote-controlled opening/closing of the barrier
• Service socket / CEE 7/3
• Other special equipment upon request
Notes: • The barrier gate is not designed for use by motorcycles, bicycles or pedestrians!
• The barrier gate is not suited for functions subject to higher security demands, e.g. safeguard against crossing hazard (railway), breakthrough (ferry access, military security areas), etc!
)
